StellaPro logo
StellaPro logo

All articles

How do I setup a Godox TriggerUpdated a year ago

Setup Godox Wireless Trigger





Enter the Reflex menu and set the wireless mode to, G, which stands for Godox. Make sure that you set the channel on the Reflex to match the channel on your Godox Transmitter. To change the channel on the Godox transmitter, hold the zoom/Channel button until the channel in the top left is highlighted. 


You can turn a group on or off by selecting the group using the buttons on the side of the Godox and then pressing the mode button. Set the active groups to manual mode as the Reflex does not implement Through-The-Lens. 


If you want to use High Speed Sync, press the SYNC button on the Godox Transmitter and the High Speed Sync icon will appear at the top of the display. If your camera is not going into HSS, consult your camera's user’s manual to find out how to put it into HSS or Auto FP mode. You can turn the continuous light on/off by pressing the MOD button. To control the Digital Burst output select a group and set the power from 1/1 to 1/16, corresponding to maximum and minimum power respectively. The Godox transmitter is unable to control the continuous output. Now your Godox X Pro transmitter is set up to control the StellaPro Reflex. Stay tuned for more tips and tricks for your StellaPro lights.

Was this article helpful?
Yes
No